Brazil Split Screens

 

“The Split – Brazilia”

From the humblest of beginnings, no one could have guessed back in November 1949 at the Geneva Motor Show, that this split-screen VW Type II bus would become the iconic vehicle that is it today. In its 18 years of production, 5 million split-screen vehicles were made, its design hardly changing until 1968.

Custom Built for you

The fundemental basics of any Restoration are good foundations.

The Option One range benefits from the comprehensive beginnings here at Wize Volkswagen, and that commences with an entire shell strip down, leaving nothing in place. What follows is our 2018 introduced Three Stage Dipping process. 

A process of Heat treating the shell by way of 'flash' burning all the materials. Followed by a long soak in the Phosphoric solutions, before entering into the rust prevention stages.

The Option One builds then enter in their 360 degree rotisserie process. We leave nothing unchecked, addressed, or repaired. They have fundemental beginnings, for their fundemental longevtivity.

Bespoke Kombivans. Built for you.

Key Details

  • RHD Conversions available
  • Complete Bare Metal Three stage Dipped restoration
  • Comprehensive reconditioning of engines and gearbox’s – with powder coated underside mechanicals
  • Full Inner, Outer and Underside Respray!
  • Near complete Mechanical replacement
  • Full new Re-wire and electrical installation
  • Bespoke, hand made cabinetry and finish on all interior aspects
  • Optional extras available to include; power steering, Brake Servos, Performance upgrades…The list is endless!

Locate it

Searching the globe, we will locate a kombi van ripe for restoration that fits your wants and needs. In most cases, these specific Split Screen kombi vans are imported from Brazil. Once located, we handle all the complicated shipping processes in the ountry of origin, to bring your Vw Split Screen into our factory, they receive the care and attention they need to bring them back to life.

Back to 'basics'

Basics is where we start, and where the long journey begins. All our Option One Brazil Split Screens receieve an entire shell strip down and parts listings, pre restoration. From here it will enter into our Three Stage Dipping process.

Not to be misunderstood, this area is just as important as every other aspect of your Brazil Split Screen build.

View Brochure

Click below to view/download our PDF brochure

The Re-spray

Our Lifetime Warranty is provided to us by our Internationally recognised paint manufacturer. They allow us this privilage, as they have assessed our working practices, and the prodcuts used and are satisifed we are doing everything for us, you and them, to ensure a long lasting finish.

Whether you choose to have an Iconic paint colour, such as Sea Blue and Cloud white, or fancy a pink Limo, we’ll be able to cater for all requests.

The Mechanics

Fundementally every aspect of the Mechanical rebuild is that of new, or reconditoned componets and parts. All of these are covered under your peace of mind Twelve Month Mechanical Warranty which comes as standard with all our builds.

Reconditoned Gearboxes, Reduction boxes, Engines, steering boxes – the list on our Option One builds is extensive. Whats more, our Restoration reports tell you exaclty what each component is!

The Interior

Our Interior layouts for the Split Screens come in four variants. Whether you would like to travel in your Kombi, moving from site day-to-day and require more cabinetry, or you would like to make best use of the internal space with a minimalist feel…We have designed our interiors as to the feedback we have received from customers over many years.

All Cabinetry is made from sustainable, lightweight, high quality laminated Ply, in a variety of colours, such as Oak, Driftwood, White Spark, but to name a few. The choice is yours!

Our Upholstery is produced for your camper, piece-by-piece. Matching to the curves and shapes of your seating.

The Valencia Vinyl range, with high quality grading and resistance is utilised on all our builds, with an extensive colour range to boot!

And there we have it… YOUR kombi van, designed, created and built for you.

What memories will you make with yours?

From £66,625

£81,625 > 01st September 2018

Building to order

Fixed price restorations

Be-spoke, hand made for you - RHD and LHD available

Bare Metal restorations as standard

Split Screen and Bay Window options

3-2-1 Warranty backed workmanship

Six stage painting system - underside painting as standard!

LIFETIME Paint warranty

Near complete mechanical replacement

Complete Electrical replacement

Selection & shipping

Our pricing structure includes the Kombivan too!

Hand picked for us, and for your order

Trusted sellers in the South Africa, USA and Brazil

We handle all importation and legalities

Shipping tracked  - follow your ship through the Suez Canal!

'No worries' - we handle it all for you

Pre-assembly

Once your kombi van arrives, and according to the schedule, we strip your vehicle in its entirety. This leaves us with just the shell and with all mechanical components removed for the next stages.

All parts removed and assessed

Labeling system and part ordering process instilled

Vehicle assessment for build time

Placed on 360 degree spinning Rotisserie for build commencemnet

Three Stage Dipping

We've worked hard with the suppliers to establish a proven Chemical Dipping Three Stage process, containing sufficient properties so as to treat your Kombivan in the very best pre-restoration process available - Three Stage Dipping

Phosphoric, Phosphate and Rust inhibitors

Entire shell heat treated, submerged in three differing chemicals removing all surface materials

Mechanical components dipped

Retained seating and interior items taken back to bare metal

Providing the best starting point we could hope for.

Fabricating

Fabrication and welding is the foremost fundamental part of any comprehensive restoration. Not to be underestimated. Get it wrong here and the rest of the build will reduce in quality.

Collective 75 year time served staff experience

MIG, TIG, SPOT welding

Led loading

Pin pulling and crease removal tooling

Welds sealed and treated

High quality replacement panels used

Entire shell accessed via 360 degree rotisserie

Panel beating

Starting on a complete bare kombi van can be daunting at the best of times, but the responsibility of our Panel Beaters is to complete your vehicle to a high level, pre painting.

Time served 55 year staff experience

Using Internationally recognised products and materials

Detailed work plan and vehicle assessment

Twice primed and guide coated

Two part Quality checking procedure

Painting Process

LIFETIME paint warranty! I know we've mentioned this already, but it is such a huge peace of mind for you, our customers. Who else offers such?

360 degree Rotisserie applications

Etch primed pre Fabrication

Epoxy primed following Fabrication

Twice applied High build primer and guide coat

Tinted Colour primed

Base and Lacquer or 2 Pk process

Superior underbody, colour tinted products used

Powder coating and finished painting to mechanical items

Mechanicals

Near complete Mechanical replacement to all our vehicles!

Why not a full replacement? Well, some of the parts we cant get new, so it would be wrong to say otherwise. Albeit these are minor parts.

Newly Reconditioned Engine with new Ancillaries

Newly Reconditioned Gearbox and reduction boxes on our Split Screens

Complete four corner mechanical parts renewal

Steering box refurbishment

LHD > RHD Conversions

Mechanical Quality checking and Road Testing procedures

Interiors

As we go through the departments, we get nearer to the finish line!

All Upholstery is made in-house by our London Saville Row Trained staff

All seating is stripped and padding replaced with Coconut hair

We use over 32 different pieces and 19 meters of material to complete your interior

Choose from over 50 differing Wood panels

Six different interior options available

CNC cut for accuracy and solid construction

Everything is made specifically for your Kombivan

High end materials and processes adopted

Coach Building

Our last process is Coachbuilding - the exciting part!

All products and materials already having been produced are now installed

Sound proofing to all areas

Internal Rust Waxoyle applied

Water barrier protected interior panels

Complete new replacement parts throughout

Led lightning, Lesiure Battery installs and Electric Hook ups fitted as standard

We spend nearly two weeks building and installing the components to your Kombivan

Completion

We spend between 10 - 12 months physically building your Kombivan. We sacrifice time and profit to ensure we achieve the quality end product you've been waiting for. With such a customer focussed approach to our program, it grows year on year. We're not happy, unless you are.

With over Ten staff working through Six differing departments, it has taken us some time to be able to bring all our processes in house to manage quality, and importantly long lasting results.

An International customer base has led us to supply our Kombivans all over the world, on a regular basis!

Will you be one of our customers? We hope so!

Interested In Working On A Project?